Our New & Improved KF105 Classic-Line® 1/2" Low-Leg Flex-Frame (actual height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive & staple method.

• Great for creating Tackable & Acoustical panels with curved edges that have a wrapped fabric appearance
• Can be used as a perimeter piece only. Combine with FS100 frame to create intermediate seam joints
• Easy to install with sure grip jaws to hold fabric tight
• Base color is "Natural" - Customization available soon
• Sold & shipped in 5 foot segments
• Product Samples available.
*Photo may vary from actual product*

Our New & Improved KF100 Classic-Line® 1/2" Flex-Frame® (actual height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive & staple method.

• Great for creating Tackable & Acoustical panels with curved edges and seams.
• Easy to install with sure grip jaws to hold fabric tight
• Can be used as a Perimeter or Intermediate piece
• Comes in Natural or Black color - Customization available soon
• Sold and shipped in 5 foot segments
• Product Samples available. Scroll down for link
*Photo may vary from actual product*

Tango 57" and 66" width is a reliable, high-traffic panel fabric that is both acoustic and tackable and comes in 8 stylish colors. The weave gives a subtle texture and adds visual interest to acoustic space. It allows the sound to pass through so it can be absorbed by the backing to create both beautiful and functional fabric covered wall panels and full-wall installations.

Parallel 57" and 66" width panel fabric is beautifully woven with multiple hues of similar colors, giving a very textured and sophisticated look. This fabric comes in 8 aesthetically pleasing colors, plus it is very high-functioning as it can be used for both acoustic and tackable purposes and is good for high-traffic areas.

ReCore® Slim-Line® 1/4 in. 10.0 PCF Backing is Tackable & Acoustical, Impact Resistant, Made from 60% Post-consumer Content, and VOC & Formaldehyde Free.

• Available in MaxTack™ Plus which is perfect for Tackable, Acoustical and Wall Protection applications
• Excellent backing choice for use with the Fabricmate Series Slim-Line® 1/4" Site-Fabricated Fabric Wall Finishing System
• Can be used in its "raw" uncovered state to reduce noise reverberations and provide thermal insulation in small to large areas such as basements, factories, warehouses, machine shops, distribution centers, sports complexes, HVAC systems and more
• Comes in White. As color may vary, we highly recommend ordering a sample
• Facing surface is paintable and can be custom printed with graphics, photos or logos - contact us for details
• Product is sold in units of 4x8 sheets (32 sq. ft.). Scroll down for link.

Our Heavy Duty Multi-Purpose Utility Knife makes cutting ReCore® and other substrates fast and easy. 
• Retractable blade for safety
• Heavy duty metal casing
• Sharp blade can cut cleanly through a variety of materials
• Ergonomic grip for comfort and ease of use
• Can be used with right or left hand

Our New & Improved FS105 Classic-Line 1/2" Frame (actual height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive and staple method.

• 1/2" Square Low-Leg profile (actual height 5/8 in.) provides a wrapped fabric appearance with reduced frame exposure.
• Easy to install with sure grip jaws to hold fabric tight.
• Can be used as a Perimeter piece.
• Ridged bottom for better surface adhesion.
• Available in Natural and Black - Customization available soon.
• Sold and shipped in 5 foot segments.
• Made of durable uPVC Product Samples available

Our New & Improved FS230 Classic-Line 1/2" Beveled Intermediate Frame (actual height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive and staple method.

• 1/2 inch Beveled Front-Load profile (actual height 5/8 in.) provides a stylish bevel appearance on panel seam and intermediate joints
• Can be used as an Intermediate/Seam piece only and is compatible with only the latest 1/2" perimeter frame profiles
• Innovative dual-bevel design requires only one piece of frame to create a joint between two panels
• Ridged bottom for better surface adhesion
• Available in Natural color only as frame is completely covered by fabric when installed
• Made of durable uPVC
• Sold and shipped in 5 foot segments
• Product Samples available. Scroll down for link.

Our New & Improved FS210 Classic-Line™ 1/2" Frame   (actual height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive and staple method. • Classic 1/2 inch profile (actual height 5/8 in.) is economical and ideal for Education and Office applications • Beveled Side-Load profile provides a wrapped fabric panel appearance with a stylish beveled edge • Easy to install with sure grip jaws to hold fabric tight • Can be used as a Perimeter piece only. Use with FS100 or FS230 frame for intermediate/seam joints • Ridged bottom for better surface adhesion • Available in Natural color only - frame is not visible when fabric is installed • At least 8" of clearance required on side of frame to roll fabric in • Sold and shipped in 5 foot segments • Made of durable uPVC • Product Samples available. Scroll down for link.

Our New & Improved FS200 Classic-Line 1/2" Beveled Frame (actual height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive and staple method. 

• Classic beveled 1/2 inch profile (actual height 5/8 in.) is economical and ideal for education, residential and commercial applications
• Beveled Front Load profile provides an aesthetically pleasing and stylish look
• Easy to install with sure grip jaws to hold fabric tight
• Can be used as a Perimeter piece only. Use with FS100 or FS230 frame for intermediate/seam joints
• Ridged bottom for better surface adhesion
• Available in Natural and Black color
• Made of durable uPVC
• Sold and shipped in 5 foot segments
• Product Samples available. Scroll down for link.

Our New & Improved FS110 Classic-Line® 1/2" Frame (actual height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive and staple method.

Classic 1/2 inch profile (actual height 5/8 in.) is economical and ideal for education and office applications

Square Side-Load profile provides a wrapped fabric panel appearance

Easy to install with sure grip jaws to hold fabric tight

Can be used as a Perimeter piece only

Ridged bottom for better surface adhesion

Available in Natural color only - frame is not visible when fabric is installed

At least 8" of clearance required on side of frame to roll fabric in Sold and shipped in 5 foot segments

Made of durable uPVC

Product Samples available. Scroll down for link.

New & Improved FS100 Classic-Line 1/2" Frame (Actual Height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive and staple method.

• Classic square 1/2 inch profile (actual height 5/8 in.) is economical and ideal for education and office applications
• Square Front Load profile provides a professional look
• Easy to install with sure grip jaws to hold fabric tight
• Can be used as a Perimeter or Intermediate piece
• Ridged bottom for better surface adhesion
• Sold and shipped in 5 foot segments
• Made of durable uPVC
• Click here to order a Product Sample

Tango is one of the most popular lines, designed for the simple yet  functional results it brings to many types of applications. 

Our New & Improved KF005 Slim-Line™ 1/4" Flex-Frame (actual height 3/8 in.) has been updated with an increased height to better accommodate 1/4" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive and staple method.

• Great for creating curved panel edges & seams for residential and office applications.
• Slim square 1/4 inch profile (actual height 3/8 in.) is Economical and ideal for Tackable and Wall Protection applications
• Easy to install with sure grip jaws to hold fabric tight
• Ridged bottom for better surface adhesion
• Can be used as a Perimeter or Intermediate piece
• Base color is "Natural" - Customization available soon
• Sold and shipped in 5 foot segments
• Made of durable uPVC
• Product Samples available