Fabricmate 7 Series Site-Fabricated Fabric Wall Finishing System DIY Starter Kit
3STARTER KIT CONTENTS

Panel Components
Frame, Backing, and Fabric - Cut to Size
Choose the backing type (Padded or Tackable) and seam type (Straight, Curved or None) for the panel you'd like to build and we'll precut everything and send it to you ready to assemble along with all the outlined Tools.

frame
The Frame - occasionally called track or trim - outlines and frames the shape of the panel or full-wall system, holding the fabric in place and protecting the edges with high-impact plastic. Starter Kits include pre-cut Frame that is ready to be installed.

backing
The Backing fills in the frame and covers the wall, absorbing reverberated sound and providing impact-resistance, thermal insulation, and a pinnable bulletin-board-like surface perfect for tacking things up.

fabric
The Fabric gets rolled into the Frame, covering the backing by stretching over the area to be covered. The fabric being stretched means that it will bounce back when hit, effectively mitigating visible damage, and allowing you to change it if desired.

diy rocker tool
Our DIY Fabric Finishing Rocker Tool is a great way to achieve fast, uniform insertion of fabric in our systems. This ergonomically designed tool is perfect for positioning fabric into frame, finishing corners, and aligning frame pieces during installation.

diy roller tool
The DIY Roller Tool provides fast, uniform insertion of fabric in panels and systems for a professional look. The one piece ergonomically designed plastic injection molded handle is sturdy and comfortable. It helps considerably with speeding up the installation.

diy 4-in-1 tool
The DIY 4-in-1 Frame Alignment & Fabric Insertion Tool makes installing the frame and finishing the fabric insertion even easier. The unique vertical angle design allows it to work in tight spaces where there is little to no clearance.

CHAMFER CUTTERS
Like having a miter box in your hand Cuts 1/4" and 1/2" Frame.

hold-it-stick adhesive
Use on Frame to prevent fabric slippage or for temporary mounting.

protective wall shield
Use between wall and Roller Tool to prevent scratching the wall.
Starter Kit • Overview Video
This video explains Fabricmate's Starter Kits which include our innovative installation tools as well as everything needed to build an on-wall panel.
PRACTICE KIT VIDEOS
How to install Practice Kit #1 (Square Panel) | How to install Practice Kit #2 (Panel with Straight Seam) | How to install Practice Kit #3 (Panel with Curved Seam) |

INNOVATIVE & VERSATILE
With a variety of sizes, shapes, and colors available, the possibilities are endless.
FRAME outlines and frames the shape of the panel or wall, holding the fabric in place and protecting the edges with a high-impact polymer frame.
BACKING fills the frame and covers the wall, absorbing reverberated sound, providing impact-resistance, thermal insulation, and a pinnable bulletin-board like surface that's perfect for tacking up photos, documents, and more.
FABRIC is stretched over the backing and held taut by the frame allowing the panel surface to spring back when struck, effectively mitigating visible damage.

WE'RE HERE TO HELP
Fabricmate® has been training contractors since 1989 - at no charge! We host 1/2 , 1, and 2 day sessions every month in our workshop. Be the next fabric wall finishing installer in your hometown. Contact Us for more info.

AVAILABLE ON DEMAND
Our system components are always immediately available. While advance notice is always appreciated, we maintain full inventories of all our products. No more long order lead times. Change order are easily accommodated.

WALL FINISHING REDEFINED
The Fabricmate® Wall Finishing System is the perfect alternative to paint. It is high-impact, offering superior wall protection. It absorbs reverberated sound to significantly improve acoustics. By design it mitigates visible damage, lasting far longer than painted walls while greatly reducing maintenance costs.