- Products
- 1/2 in. (Actual Height 5/8 in.) Square Low Leg - Classic-Line® Fabric Mounting Frame FS105 - Sold by the 5 ft Stick (+/- 1/2")
1/2 in. (Actual Height 5/8 in.) Square Low Leg - Classic-Line® Fabric Mounting Frame FS105 - Sold by the 5 ft Stick (+/- 1/2")
3 /shop/1-2-in-actual-height-5-8-in-square-low-leg-classic-line-r-fabric-mounting-frame-fs105-sold-by-the-5-ft-stick-1-2-4026Our New & Improved FS105 Classic-Line 1/2" Frame (actual height 5/8 in.) has been updated with an increased height to better accommodate 1/2" substrates and allow for the proper air gap, as well as new Glue Grooves for better adhesion when using the adhesive and staple method.
- 1/2" Square Low-Leg profile (actual height 5/8 in.) provides a wrapped fabric appearance with reduced frame exposure.
- Easy to install with sure grip jaws to hold fabric tight.
- Can be used as a Perimeter piece.
- Ridged bottom for better surface adhesion.
- Deco-Frame is ideal for Perimeter or exposed areas to match with your trims
- Sold and shipped in 5 foot segments (length may vary +/- 1/2")
- Made of durable uPVC Product Samples available
Our Simple Three Part Stretched Fabric System
1. Frame
The Frame outlines the shape of the panel or wall, holding the fabric in place and protecting the edges with a high-impact polymer frame. Frames are used as Intermediate Joints for instances when installation width is greater than width of the fabric. Learn More
2. Backing
Backing is placed within the frame covering the wall. Fabricmate offers a variety of backings that absorb reverberated sound, provide wall protection, thermal insulation, and make a pinnable bulletin-board like surface. Learn More
3. Fabric
Fabric is stretched taut over the backing rolled into the frame. This allows the panel surface to spring back when struck, effectively mitigating visible damage. When its time to refresh your look easily remove and replace the fabric.
Learn More
OVERVIEW: FS105 SQUARE LOW-LEG
![]() | Our NEW FS105 Fabric Mounting Frame is often the choice where a tackable or acoustical solution is sought. The square profile produces clean, crisp joints and edges. It can be used as a perimeter piece with any ½ in substrate. It’s front loading feature allows it to be placed up against almost any surface including walls, door moldings, etc. The Low Leg feature allows the fabric to come over the top to further cover the frame from view. Our "Natural" color Frame is the best option when you want a low-key perimeter around your panel or installation. If you're looking for something that stands out a bit more, we will soon be offering a number of color and style options that are sure to take your panel or full-wall installation to the next level. We've made some exciting changes and updates but unfortunately this new Frame is NOT compatible with previous versions of our FS105 ½ inch frame. This Frame is perfect for use with our Fabric Wall Finishing System. Combined with our ReCore® Backing and Fabric, this Frame can be used to create anything from full-wall photographic murals to smaller acoustic or bulletin-board panels as well as wainscoting and other types of Wall Protection. |
BENEFITS
![]() EASILY CUSTOMIZABLE Our Frame is flexible and easy to work with, making customization a breeze. Our Frame also works great when you run into walls that are not perfectly symmetrical or have dents, damage, and wear and tear. Since our frame is flexible, you can follow the lines to the tee, even the crooked ones. Take control of your walls. | ![]() FLEXIBLE With our Flex-Frame® you can create rounded corners, wavy layouts, and full on rounded/circular designs. Great for baffles, styled installations, and ceilings. | ![]() TIRED OF TRADITIONAL Bored with the regular old rectangle and square panels? With our Flex-Frame® you can create fully customized layouts including creating your own custom curved or circular design. | ![]() BUILT SMART We now offer Fabricmate Frame Kits to make your installation even easier! We've created pre-cut Kits for Switches & Outlets, Inside Corners, Outside Corners, Seams, and more so you don't have to waste extra time figuring out angles, sizes, and other technical details. |
DOCUMENT DOWNLOADS
![]() DATA SHEET Download the FS105 Data Sheet including information on the Profile Technical Details, Features, Specifications, and more. | ![]() MATERIALS & TIME Download this sheet to help you discover the approximate amount of materials and time needed for your installation. | PRODUCT CATALOG Download the Fabricmate® 2020 Product Catalog to get more information on our system as well as our product offerings. | GENERAL BROCHURE Download the Fabricmate® General Brochure with a breakdown of how the system works, installation options, and Panel/Full-Wall Features. | ![]() INSTALLATION GUIDE Download the Fabricmate® Installation Guide for a comprehensive explanation of the system, tips & tricks, how to install, and additional system options. | ![]() QUICK START GUIDE Download the Fabricmate® Quick Start Guide for basic instructions on how to quickly get started with your installation. |
| DOWNLOAD | DOWNLOAD | DOWNLOAD | DOWNLOAD | DOWNLOAD | DOWNLOAD |
PRODUCT VIDEO LINKS
|
|
FRAME DETAILS
HEIGHT
1/2"
EDGE PROFILE
SQUARE
EDGE USAGE
YES
SEAM USAGE
NO
LOAD DIRECTION
FRONT-LOAD
CURVABLE
YES
ADDITIONAL THICKNESSES
1/4" (SLIM-LINE®)
1/2" (CLASSIC-LINE®)
1" (FULL-LINE®)
2"+ (MAX-LINE®)
FRAME KITS: INSTALLATION JUST GOT EASIER
Our Kits make installation even easier! We have pre-cut Kits for the most common installation scenarios. These Kits make on-site installations even quicker and easier. No need to figure out any angles, sizing, or otherwise. These Kits are ready to go and make it incredibly easy to create seams or go around windows, doors, outlets, switches, create inside & outside corners, and more!
Corner Kits
Seam Kits
Window/Door Kits
Window/Door Kits w/Seam
Cross Seam Kit
Outlet/Switch Kits
Inside Wall Corner Kits
Inside Wall Corner Seam Kits
Outside Wall Corner Kit
Outside Wall Corner Kit w/SeamPhoto shows Corner Kit (5 & 6 Pieces)
COMPATIBILITY SAMPLES
Order one of our Compatibility Samples to get a hands-on experience with our system and how it works. These 8.5" x 11" working sample boards are the easiest and lowest cost way to get introduced to our system first-hand.
With a Compatibility Sample you can:• Try your own fabrics with the system
• Hit Test - Yes, for real - Protect your walls in style
• Install / Uninstall fabric - Easy changeability
• It's Tackable - Use tacks or pushpins to hang something on it
• Get familiar with our system
With a full-size panel (4'x8' or larger) or full-wall installation you can expect Acoustic improvements (results will differ depending on the makeup/options chosen).
GALLERY












![]() |
|
Product videos here
IDEA GALLERY












TERMS & CONDITIONS
Please note Fabricmate will not print images or graphics that are the copyright or intellectual property of a third party unless you can submit proof in writing that you are the owner or that you have the permission from the owner or copyright holder to reproduce said images or graphic designs. We reserve the right to refuse a graphic print order which may, in our opinion, be illegal or infringe on the rights of others. The customer is subject to full legal liability for any images or graphics that are printed on their behalf and under their instructions and agrees to hold Fabricmate harmless for any and all liabilities, losses, claims, judgments, penalties, expenses or demands that may arise from the printing of customer-provided images or graphics. No returns on Printed materials.
RESERVATIONS
Reservations are highly encouraged to ensure proper inventory is in stock and available, reservations will only be held for 30 days, unless other prior written arrangements are made. Reservations should be faxed, e-mailed or mailed in writing including product type, quantities and the dates materials are to be delivered.
ORDER FULFILLMENT/SHIPPING
Fabricmate® Systems, Inc. makes every attempt to fill all orders in a timely manner, usually within 1-5 business days. However, sometimes due to circumstances beyond our control, or during high ordering periods an order may be delayed or back ordered. If a delay or back order occurs, you will receive notification via e-mail or phone. Back orders in most cases will ship no later than 6-8 weeks after receiving customer purchase orders. Please note that on all orders shipped to destinations outside of the United States the receiver is responsible for any taxes, duties and fees incurred.
PLEASE INSPECT THE SHIPMENT IMMEDIATELY
Fabricmate® Systems, Inc. tries to ensure that your shipment is delivered to the highest standards of quality, however any damage or loss incurred in transit is the responsibility of the carrier. In the event that an error or damage occurs, the following procedure must be followed:
IN CASE OF DAMAGE OR LOSS:
For UPS and Fed Ex shipments (and all other small package deliveries)
- Notify Fabricmate® Systems within 5 business days of receipt.
- Retain the merchandise AND packing material for inspection by the carrier. Take photos of damage if possible.
For Common Carrier (truck) shipments
- Notify Fabricmate® Systems within 5 business days of receipt.
- Retain the merchandise AND packing material for inspection by the carrier. Take photos of damage if possible.
- For common carrier claims, the carrier requires the recipient of the merchandise to file claims and receive reimbursement.
RETURNED GOODS
Do not return any merchandise for any reason without first calling our Customer Service Department. All unauthorized returns may be refused at our dock. Stock items ordered in error may be returned (freight prepaid) for credit within 30 days less a 20% restocking charge, however, cut material is subject to a 40% restocking charge. Returns over 30 days from invoice date will not be accepted. Please have your shipping order number and date of delivery on hand when calling.
Our Simple Three Part Stretched Fabric System
1. Frame
The Frame outlines the shape of the panel or wall, holding the fabric in place and protecting the edges with a high-impact polymer frame. Frames are used as Intermediate Joints for instances when installation width is greater than width of the fabric. Learn More
2. Backing
Backing is placed within the frame covering the wall. Fabricmate offers a variety of backings that absorb reverberated sound, provide wall protection, thermal insulation, and make a pinnable bulletin-board like surface. Learn More
3. Fabric
Fabric is stretched taut over the backing rolled into the frame. This allows the panel surface to spring back when struck, effectively mitigating visible damage. When its time to refresh your look easily remove and replace the fabric.
Learn More
OVERVIEW: FS105 SQUARE LOW-LEG
![]() | Our NEW FS105 Fabric Mounting Frame is often the choice where a tackable or acoustical solution is sought. The square profile produces clean, crisp joints and edges. It can be used as a perimeter piece with any ½ in substrate. It’s front loading feature allows it to be placed up against almost any surface including walls, door moldings, etc. The Low Leg feature allows the fabric to come over the top to further cover the frame from view. Our "Natural" color Frame is the best option when you want a low-key perimeter around your panel or installation. If you're looking for something that stands out a bit more, we will soon be offering a number of color and style options that are sure to take your panel or full-wall installation to the next level. We've made some exciting changes and updates but unfortunately this new Frame is NOT compatible with previous versions of our FS105 ½ inch frame. This Frame is perfect for use with our Fabric Wall Finishing System. Combined with our ReCore® Backing and Fabric, this Frame can be used to create anything from full-wall photographic murals to smaller acoustic or bulletin-board panels as well as wainscoting and other types of Wall Protection. |
BENEFITS
![]() EASILY CUSTOMIZABLE Our Frame is flexible and easy to work with, making customization a breeze. Our Frame also works great when you run into walls that are not perfectly symmetrical or have dents, damage, and wear and tear. Since our frame is flexible, you can follow the lines to the tee, even the crooked ones. Take control of your walls. | ![]() FLEXIBLE With our Flex-Frame® you can create rounded corners, wavy layouts, and full on rounded/circular designs. Great for baffles, styled installations, and ceilings. | ![]() TIRED OF TRADITIONAL Bored with the regular old rectangle and square panels? With our Flex-Frame® you can create fully customized layouts including creating your own custom curved or circular design. | ![]() BUILT SMART We now offer Fabricmate Frame Kits to make your installation even easier! We've created pre-cut Kits for Switches & Outlets, Inside Corners, Outside Corners, Seams, and more so you don't have to waste extra time figuring out angles, sizes, and other technical details. |
DOCUMENT DOWNLOADS
![]() DATA SHEET Download the FS105 Data Sheet including information on the Profile Technical Details, Features, Specifications, and more. | ![]() MATERIALS & TIME Download this sheet to help you discover the approximate amount of materials and time needed for your installation. | PRODUCT CATALOG Download the Fabricmate® 2020 Product Catalog to get more information on our system as well as our product offerings. | GENERAL BROCHURE Download the Fabricmate® General Brochure with a breakdown of how the system works, installation options, and Panel/Full-Wall Features. | ![]() INSTALLATION GUIDE Download the Fabricmate® Installation Guide for a comprehensive explanation of the system, tips & tricks, how to install, and additional system options. | ![]() QUICK START GUIDE Download the Fabricmate® Quick Start Guide for basic instructions on how to quickly get started with your installation. |
| DOWNLOAD | DOWNLOAD | DOWNLOAD | DOWNLOAD | DOWNLOAD | DOWNLOAD |
PRODUCT VIDEO LINKS
|
|
FRAME DETAILS
HEIGHT
1/2"
EDGE PROFILE
SQUARE
EDGE USAGE
YES
SEAM USAGE
NO
LOAD DIRECTION
FRONT-LOAD
CURVABLE
YES
ADDITIONAL THICKNESSES
1/4" (SLIM-LINE®)
1/2" (CLASSIC-LINE®)
1" (FULL-LINE®)
2"+ (MAX-LINE®)
FRAME KITS: INSTALLATION JUST GOT EASIER
Our Kits make installation even easier! We have pre-cut Kits for the most common installation scenarios. These Kits make on-site installations even quicker and easier. No need to figure out any angles, sizing, or otherwise. These Kits are ready to go and make it incredibly easy to create seams or go around windows, doors, outlets, switches, create inside & outside corners, and more!
Corner Kits
Seam Kits
Window/Door Kits
Window/Door Kits w/Seam
Cross Seam Kit
Outlet/Switch Kits
Inside Wall Corner Kits
Inside Wall Corner Seam Kits
Outside Wall Corner Kit
Outside Wall Corner Kit w/SeamPhoto shows Corner Kit (5 & 6 Pieces)
COMPATIBILITY SAMPLES
Order one of our Compatibility Samples to get a hands-on experience with our system and how it works. These 8.5" x 11" working sample boards are the easiest and lowest cost way to get introduced to our system first-hand.
With a Compatibility Sample you can:• Try your own fabrics with the system
• Hit Test - Yes, for real - Protect your walls in style
• Install / Uninstall fabric - Easy changeability
• It's Tackable - Use tacks or pushpins to hang something on it
• Get familiar with our system
With a full-size panel (4'x8' or larger) or full-wall installation you can expect Acoustic improvements (results will differ depending on the makeup/options chosen).
GALLERY






























