Fabricmate Videos

From Professional Contractors to weekend Do-It-Yourselfers this video explains all of Fabricmate's innovative installation tools that will help make your job even easier when installing our site-fabricated fabric wall finishing system. Learn which tool is best for you and how to use it.

One of the biggest advantages of using Fabricmate's Fabric Wall Finishing System is the ease of changeability when it comes time to redecorate or update your walls. With our system you can remove and replace just the Fabric while the existing Frame and Backing remain in place. This video shows you valuable Tips & Techniques used to remove the Fabric from an existing Fabricmate Site-Fabricated Fabric Wall Panel and replace it with a new piece of Fabric.

This video shows you step-by-step how to install - on the wall - Fabricmate's Practice Kit #3 for the 7 Series Site-Fabricated Wall Finishing System. This kit includes pre-cut components that will create a 24" x 48" Fabric Wall Panel with a curved intermediate seam joint. After mastering this kit you will be more proficient in creating larger square and rectangular Fabric Wall Panels with curved edges and intermediate seam joints using Fabricmate's Site-Fabricated Wall Finishing System. To get the Fabricmate Practice Kit #3 and our other Practice Kits and Training Aids go to https://www.fabricmate.com/shop/category/training-aids-practice-kits-354

Keep your Fabricmate® Hand Chamfer Cutters working like new by replacing the Anvil and Blade when needed. This video will show you how to do it. Get replacement Blades and Anvils on our website at https://www.fabricmate.com/shop/category/installation-tools-hardware-60

Learn how to use Fabricmate's Helping Hand Fabric Tool when installing fabric on our site-fabricated fabric wall finishing system. You will see how this tool can help you easily tighten up loose fabric and also get the weave of the fabric straight during installation. It can also be used after installation if the fabric stretch should need tightening or repositioning.

This brief video gives an excellent demonstration on how to use our Helping Hand tool to remove bulges, crinkles and wrinkles when rolling in the fabric on Fabricmate fabric covered wall panels.

Tips and Tricks on Tools
How to use the Rocker Tool

Learn how to use Fabricmate's Hold-It Stick to keep the fabric from slipping during and after installation of our site-fabricated fabric wall finishing system. When certain fabrics are used they may tend to slip against the fabric mounting frame and become loose. Find out how the Hold-It Stick can help prevent this from occurring.

Tips and Tricks on Tools
How to use the Rocker Tool

This video shows you step-by-step how to install - on the wall - Fabricmate's Practice Kit #2 for the 7 Series Site-Fabricated Wall Finishing System. This kit includes pre-cut components that will create a 24" x 48" Fabric Wall Panel with an intermediate seam joint. After mastering this kit you will be more proficient in creating larger square and rectangular Fabric Wall Panels with an intermediate seam joint using Fabricmate's Site-Fabricated Wall Finishing System. To get the Fabricmate Practice Kit #2 and our other Practice Kits and Training Aids go to https://www.fabricmate.com/shop/category/training-aids-practice-kits-354

Learn valuable tips & tricks on how to prevent fabric slippage with the Fabricmate Stretched-Fabric Wall Finishing System.

Learn how to get the most from your Fabricmate® DIY Rocker and DIY 4-in-1 Fabric Insertion/Corner Finishing Tools by reshaping the blades using scissors and sandpaper. Reshaping them will extend the life of the tool and add more functionality when installing our Site-Fabricated Fabric Wall Finishing System.